Gps Operation - Icom IC-V82 Instruction Manual

■ GPS operation

A GPS receiver (RS-232 output/NMEA format/4800 bps) can
be connected to [DATA] jack of the IC-V82/U82 to indicate the
current position (Latitude and Longitude). The position data
can also be transmitted with a message to another station.
D D Position indication
q While connected to a GPS receiver, push [A•
] to enter
[0•
OPTION SET MODE
OPT
w Push [Y Y ] or [Z Z ] several times to select the GPS setting.
• "GPS" appears.
e Rotate [VOL] to select the suitable sentence formatter for
the connecting GPS receiver.
• Sentence formatters
1 GLL 6 GLL, GGA 11 GGA, GSA
2 GGA 7 GLL, RMC 12 GGA, VTG
3 RMC 8 GLL, GSA 13 RMC, GSA
4 GSA 9 GLL, VTG 14 RMC, VTG
5 VTG 10 GGA, RMC 15 GSA, VTG
] and
FUNC
.
16 GLL, GGA, RMC 21 GLL, GSA, VTG
17 GLL, GGA, GSA 22 GGA, RMC, GSA
18 GLL, GGA, VTG 23 GGA, RMC, VTG
19 GLL, RMC, GSA 24 GGA, GSA, VTG
20 GLL, RMC, VTG 25 RMC, GSA, VTG
DIGITAL MODE OPERATION
rPush [Y Y ] twice to select the position indication.
tPush and hold [0•
] for 1 sec. to enter the position indi-
OPT
cation.
• Latitude and longitude date appear in order as below.
Appears
North or South Degrees
Push
Push
Appears
Seconds
yAfter checking the current position, push [✱•
]) to return to normal operating mode.
[D•
CLR
IMPORTANT: When setting the sentence formatter in
step e for connection to a GPS receiver, and you have al-
ready programmed your own call sign, the GPS transmit
setting will automatically activate to every 3 minutes. The
automatic transmission can be changed to an interval time
or deactivated, if desired. (see the next page)
11
Appears Appears
Minutes Seconds
Appears Appears
Minutes East or West Degrees
] (or
ENT
11
57