Icom IC-V82 Instruction Manual page 73

D D Scan pause timer
Selects the scan pause time from SCt.5, SCt.10, SCt.15 and
SCP. 2. When receiving signals, the scan pauses according
to the scan pause time.
• SCt. 5/10/15 : Scan pauses for 5/10/15 sec.
(default: SCt.15)
• SCP. 2 : Scan pauses until the signal disappears. Re-
sumes 2 sec. after the signal disappears.
D D Function key timer
elects the function indicator display timer (when pushed
S
]) from F0.At, F1.At, F2.At, F3.At and F .m.
[A•
FUNC
• F0.At : " " disappears immediately after secondary func-
F
tion is operated. (default)
• F1/2/3.At: " " disappears after 1/2/3 sec. after secondary
F
function is operated.
• F .m : " " appears until [A•
F
] is pushed again.
FUNC
OTHER FUNCTIONS
D D LCD backlight
Selects LCD backlight lighting condition from auto, ON and
OFF.
• LIG.At : Lights when any key except [PTT] is pushed. (de-
fault)
• LIG.ON : Lights continuously while the transceiver is pow-
ered ON.
• LIG.OF : Never lights.
D D Transmission permission
Turns transmission permission ON and OFF. This function
can be set for each memory and call channel, independently.
• tX .On : Transmission is permitted. (default)
• tX .OF : Transmission is inhibited.
12
12
61