When Receiving A Digital Call - Icom IC-V82 Instruction Manual

11
DIGITAL MODE OPERATION
D D When calling the desired station
(continued from p. 43 step t)
y Select the desired call sign.
- Push [Y Y ] or [Z Z ] several times to select the call sign select
mode.
• "yUC" appears.
- Push [0•opt] then rotate [VOL] to select the desired call
sign (pre-programmed), or set the desired call sign. (see
p. 38)
- Push [✱• ] to exit
ENT
uPush and hold [PTT] to transmit and speak into the micro-
phone at normal voice level.
• Transmit indicator appears and the RF meter shows the output power.
i Release [PTT] to return to receive.
• The other station call sign will be received.
• Received call signs can be stored into the received call record
automatically. See page 42 for details.
44
.
OPTION SET MODE

■ When receiving a Digital call

When an individual station call is received, the calling station
call sign can be stored into the received call record.
The record is cleared once turning power OFF.
D D Received call record
q Push [A•
] then [0•
FUNC OPT
then push [Y Y ] or [Z Z ] several times to select the received
call indication.
• "RXCALL," "R1CALL," and "R2CALL" are available for the re-
ceived station call sign, repeater 1/2 call signs, respectively.
w To confirm the received call, push [0•
enter the received call sign indication mode.
] for enter
OPTION SET MODE
] for 1 sec. to
OPT
,