Mode Buttons; Program Button; Multi Button; Global Button - Kurzweil Forte Manual

Mode Buttons

The Mode buttons are located beneath the "Mode" label on the right side of the Forte front
panel.

Program Button

Pressing the Program button enters Program Mode (described in
5-1 and, in further detail, in Program Mode on page
Program Mode, you can select and play different sounds (or "Programs"). This button's LED
is illuminated when you are in Program Mode. Program Mode is the default Mode — the
Forte always boots up in this Mode.

Multi Button

Pressing the Multi button enters Multi Mode (described in
and, in further detail, in
configurations of Programs, controller assignments, and MIDI channel assignments.
This button's LED is illuminated when you are in Multi Mode.

Global Button

Pressing the Global button enters Global Mode (described in
and, in further detail, in
that control the overall behavior of the Forte. These parameters include tuning, transposition
and velocity as well as being able to reset the Forte back to a factory state.
This button's LED is illuminated when you are in Global Mode.
Ch. 10 Multi
Ch. 12 Global
CAUTION: Performing a Reset will erase ALL User Program and User
Multis, and will reset Global settings to a factory state.
Features of the Forte and Forte7
Ch. 6 Program
Multi Mode on page 5-2
Mode). In Multi Mode, you can select different
Mode). In Global Mode, you can edit parameters
Program Mode on page
Mode). In
Global Mode on page 5-3
3-11