Table of Contents
Advertisement
Chapter 5
Voice Mode
Changing Category Default Voices
Pressing a Category button selects the default or "first" voice for that category. You can change the default voice for
that category. Follow these simple steps:
In Voice Mode, select the category and press the Prev- and Next+ buttons to find your desired sound to save as
your default. Press and hold its Category button until the display reads SAVED. Release the button when SAVED
shows on the display. Your new sound is now saved as the first or default voice for that category.
Using Variations
For most voices, pressing the Variation button will enable a pad layer, string layer, or
effect.
Storing a Favorite Voice
You can quickly save any voice or layered sounds as a favorite. Just select a voice, or layer, then press and hold one of
the six Favorites buttons. The voice is now stored in that location.
page 14
In addition to the many presets already available in the Andante CGP220, you can
create layered voices and add even more depth and breadth to its rich sounds.
Layering combines two of the Andante CGP220 voices enabling you to play both
voices together.
There are three parameters available in Layer Mode: Voice, Volume, and
Transposition. Changing the value of a parameter determines the characteristics of
the layer.
Depending on the selected parameter some buttons operate differently. The following is a description of the Layer
Mode navigation buttons.
Layer Mode Navigation Buttons
▲
▼
Select
Buttons
and
In Layer Mode, Use these buttons to step through the available
parameters.
Prev- or +Next Buttons
To change the value of parameter, press the Prev- or +Next button.
For the Layer Voice parameter, use these buttons to step through the category voices. In Layer
Volume or Layer Transposition, use these buttons to increase or decrease a value.
Pressing the Prev- or +Next button pair together will reset the current parameter back to factory default
value.
Category Buttons
In Layer Voice, use this button to select another voice category; it behaves in the same manner
as in Voice Mode. If the Layer Volume or Layer Transposition parameter is active, pressing a
category button returns the Andante CGP220 to the Layer Voice parameter.
Layer Mode Parameters
Layered Voice
Select the voice you want as your primary voice, by choosing a sound type in
the Category section. Advance with the Prev- or +Next buttons to find your
voice.
Next, press the Layer button to enter Layer Mode. When the Layer
button is pressed, the current voice becomes the primary layer voice.
The Layer button LED lights and secondary voice of the layer appears
on the screen. (The default is 65, Adagio Strings, or the last secondary
voice selected since the instrument was switched on). The primary voice
is now layered with the secondary voice.
Chapter 6
Layer Mode
page 15
Advertisement
Table of Contents
