Feature Descriptions; Menu 1 - Avital 4003 Installation Manual

Feature descriptions

The features of the system are described below with default settings in
bold.
Important:
only when adding a receiver (P/N 543H) and re-
mote P/N 474L).

➢ Menu 1

1 HORN HONk PULSES*—ON,
mation honks when locking/unlocking. Use it to change the output
pulse duration for vehicles that require a longer pulse for the horn to
honk. Confirmation honks ON (20mS) & panic, (2) Confirmation honk
(30mS) & panic, (3) Confirmation honk (40mS) & panic, (4) Confirma-
tion honk (50mS) & panic, (5) Confirmation honk OFF.
2 IGNITION CONTROLLED LOCk*—
ON the doors locks 3 seconds after the ignition is turned on.
3 IGNITION CONTROLLED UNLOCk*—OFF, ON: When
programme d ON the doors will unlock automatically when the key is
turned off.
4 DOOR LOCk PULSE DURATlON*—
Some European vehicles, such as Mercedes-Benz and Audi, require
longer lock and unlock pulses to operate the vacuum pump. Program-
ming the system to provide 3.5 second pulses, accommodates the door
lock interface in these vehicles. The default setting is 0.8 second door
lock pulses. (Refer to TechTip 1041 for wiring information regarding
Type E - Mercedes-Benz and Audi -1985 and Newer diagram.) The
0.4 second pulse is required on newer Chrysler and Ford vehicles.
© 2009 Directed Electronics. All rights reserved.
Features with an asterisk (*) are available
OFF(1)
:Turns On/Off the confir-
OFF
, ON: When programmed
0.8
, 3.5, 0.4 SECONDS:
29