Avital 4003 Installation Manual page 28

For example: You have programmed Channel Three and you want to
program Channel Four. Release the Program switch. Press it one time
and release it to advance from Channel Three to Channel Four. Now,
HOLD
press and
not release it.
Learn Routine will be exited if:
• Ignition is turned off.
• Program switch is pressed too many times.
• More than 25 seconds elapses between programming steps.
24
Release.
4. The Program switch can be released.
You can advance from programming one channel
to another by releasing the Program switch and
tapping it to advance steps and then holding it.
the Program switch. The LED will flash four times, do
© 2009 Directed Electronics. All rights reserved.