Avital 4003 Installation Manual page 21

Directed electronics

Table of Contents

H2/3

BROWN

This wire MUST be connected to the vehicle's brake light wire. This is

the wire that shows (+) 12V when the brake pedal is depressed. The

remote start will be disabled or shut down any time the brake pedal is

depressed.

H2/4

GRAY

This wire MUST be connected to the hood pinswitch. This input will dis-

able or shut down the remote start when the hood is opened.

H2/5

BLUE/WHITE

This wire supplies a 200mA output as soon as the module begins the

remote start process. The H2/5 BLUE/WHITE wire can also be used

to activate the defogger trigger (latched/pulsed) 10 seconds after suc-

cessful remote start. (See the

for details about programming this output.)

(+) BRAKE SWITCH SHUTDOWN WIRE

(-) HOOD PINSWITCH SHUTDOWN WIRE

(-) 200mA 2ND STATUS/REAR DEFOGGER OUTPUT

Feature Descriptions

section in this guide

Table of Contents

Show Quick Links

Table of Contents