Avital 4003 Installation Manual page 30

4. Activate Input. Each time the white/blue H1/4 is pulsed, the LED
will turn on or off indicating the feature setting. If the feature has more
than two selections, each time this input is pulsed the next available set-
ting will be picked. For example if 60 minute runtime is chosen, (Menu
2 feature 2) the LED flashes 3 times.
You can advance from feature to feature by pressing and releasing the
Program switch the number of times necessary to get from the feature
you just programmed to the feature you wish to access. For example,
in Menu One, if you just programmed Feature 1-3 to off, and you want
to program the next feature 1- 4, release the Program switch. Press and
release it once to advance from Feature 1-3 to Feature 4. Then press
the switch once more and
confirm that you have accessed Feature 1- 4.
The learn routine will be exited if any of the following occurs:
• The ignition is turned on.
• The Program switch is pressed too many times.
• More than 25 seconds elapses between programming steps.
26
Release.
5. The Program switch can now be re-
leased.
HOLD.
The LED flashes in groups of 4 to
© 2009 Directed Electronics. All rights reserved.