Shutdown Diagnostics - Avital 4003 Installation Manual

Shutdown diagnostics

The unit has the ability to report the cause of the last shutdown of the
remote start system. To enter diagnostic mode:
The LED reports the last system shutdown by flashing for one minute in
grouped patterns, the flashing stops when the ignition is turned on. The
following table describes the LED group patterns.
© 2009 Directed Electronics. All rights reserved.
1. Turn the ignition off.
HOLD
2. Press and
3. Turn the ignition on and then off.
4. Release the Program switch.
5. Press and release the Program switch.
the Program switch.
35