Table of Contents
Advertisement
Use
Timeouts
Wait Timeout
Disabled
15–65535 sec
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Error Recovery
Max Auto Reboots
1–20
Print Recovery
Auto Continue
Disabled
5–255 sec
Print Recovery
Jam Recovery
On
Off
Auto
User's Guide
To
Set the amount of time in seconds the printer waits for
additional data before canceling a print job.
Notes:
•
"40 sec" is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation. This setting has no effect on PCL
emulation print jobs.
Automatically restart the printer back into the normal operation.
Note: "Reboot when idle" is the factory default setting.
Determine the number of automatic restarts the printer can
perform.
Notes:
•
5 is the factory default setting.
•
When the number of restarts equals the specified value,
then the error message appears.
Let the printer automatically continue printing from certain
offline situations when not resolved within the specified time
period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Notes:
•
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
•
On sets the printer to always reprint jammed pages.
•
Off sets the printer to never reprint jammed pages.
- 91 -
Advertisement
Table of Contents
