Table of Contents
Advertisement
Action
Step 4
Make sure that the paper has no
texture or rough finishes.
Are you printing on textured or rough
paper?
Step 5
1.
Load paper from a fresh
package.
Note: Paper absorbs moisture
due to high humidity. Store
paper in its original wrapper until
you use it.
2.
Resend the print job.
Is the print still too light?
User's Guide
Yes
From the Paper Texture menu,
change the texture settings to match
the paper you are printing on. To
access the Paper Texture menu, do
either of the following:
•
If the printer is on a network,
then open a Web browser and
type the printer IP address in the
address field. Then navigate to
Settings >Paper Menu >Paper
Texture.
Note: If you do not know the IP
address of the printer, then print
a network setup page and locate
the IP address in the TCP/IP
section.
•
If the printer is connected to a
computer by a USB cable, then
open the Local Printer Settings
Utility for Windows or Printer
Settings for Macintosh.
Go to step 6.
- 219 -
No
Go to step 5.
The problem is solved.
Advertisement
Table of Contents
