Table of Contents
Advertisement
- On
- On
If the printer control panel light sequence matches the light sequence in the preceding illustration, then
press
twice quickly to see the supplemental light sequence.
- On
- Blinking
- On
If the supplemental light sequence matches the light sequence in the preceding illustration, then try one
or more of the following:
•
From the printer control panel, press
•
Unplug the router, then wait for 30 seconds, and then plug the router back again.
•
Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
•
Update the network firmware in the printer or print server.
User's Guide
to continue printing.
- 171 -
Advertisement
Table of Contents
