Table of Contents
Advertisement
Use
PCL Emulation Settings
Auto LF after CR
On
Off
Tray Renumber
Assign MP Feeder
Off
None
0–199
Assign Tray [x]
Off
None
0–199
Assign Manual Paper
Off
None
0–199
Assign Manual Env
Off
None
0–199
Tray Renumber
View Factory Defaults
MPF Default = 8
Tray1 Default = 1
Tray2 Default = 4
Tray3 Default = 5
Tray4 Default = 20
Tray5 Default = 21
Env Default = 6
MPaper Default = 2
MEnv Default = 3
User's Guide
To
Specify whether the printer automatically performs a line feed (LF) after a
carriage return (CR) control command.
Note: Off is the factory default setting.
Configure the printer to work with printer software or programs that use
different source assignments for trays and feeders.
Notes:
•
Off is the factory default setting.
•
None cannot be selected. It is only displayed when it is selected by the
PCL 5 interpreter. It also ignores the Select Paper Feed command.
•
0–199 allows a custom setting to be assigned.
View the factory default setting assigned to each tray or feeder.
- 102 -
Advertisement
Table of Contents
