Table of Contents
Advertisement
Adjusting toner darkness
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
-
Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP
section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
-
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Print Settings >Quality Menu.
3. Adjust the toner darkness setting.
4. Click Submit.
Using the printer settings on the computer
Depending on your operating system, adjust the toner darkness settings using the Local Printer Settings
Utility or Printer Settings.
Canceling a print job
Canceling a print job from the computer
For Windows users
1. Open the printers folder.
a. Click
, or click Start and then click Run.
b. In the Start Search or Run dialog, type control printers.
c. Press Enter, or click OK.
2. Double-click the printer icon.
3. Select the print job you want to cancel.
4. Click Delete.
For Macintosh users
1. From the Apple Menu, navigate to either of the following:
-
System Preferences >Print & Scan > select a printer >Open Print Queue
-
System Preferences >Print & Fax > select a printer >Open Print Queue
2. From the printer window, select the print job you want to cancel, and then click Delete.
User's Guide
- 61 -
Advertisement
Table of Contents
