Table of Contents
Advertisement
AppleTalk menu
Note: This menu is available only in printer models connected to a wired network or when an optional
network card is installed.
Use
Activate
Yes
No
View Name
View Address
Set Zone
[list of zones available on the
network]
User's Guide
To
Enable or disable AppleTalk support.
Note: Yes is the factory default setting.
Show the assigned AppleTalk name.
Note: The name can be changed only from the Embedded Web Server.
Show the assigned AppleTalk address.
Note: The address can be changed only from the Embedded Web Server.
Provide a list of AppleTalk zones available on the network.
Note: The factory default setting is the default zone for the network. If no
default zone exists, then the zone marked with an asterisk (*) is the default
setting.
- 80 -
Advertisement
Table of Contents
