Table of Contents
Advertisement
If the supplemental light sequence matches the light sequence in the preceding illustration, then try one
or more of the following:
•
Remove the toner cartridge, and then reinstall it.
•
Remove the toner cartridge, and then install a new one. For more information, see the instruction
sheet that came with the supply.
Replace unsupported cartridge [32.xy]
- On
- On
- On
- On
If the printer control panel light sequence matches the preceding light sequence, then remove the toner
cartridge, and then install a supported one. For more information, see the instruction sheet that came with
the supply.
Note: If you do not have a replacement toner cartridge, then see the "Ordering supplies" section of the
User's Guide.
User's Guide
- 149 -
Advertisement
Table of Contents
