Table of Contents
Advertisement
Using Sleep and Hibernate modes
Sleep mode saves energy by lowering power consumption during extended periods of inactivity.
Hibernate mode is an ultra-low-power operating mode. When operating in Hibernate mode, all other
systems and devices are powered down safely. When in Hibernate mode, the printer does not respond to
print jobs.
Note: Sleep and Hibernate modes can be scheduled. For more information, see
Modes.
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
-
Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP
section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
-
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >General Settings >Sleep Button Settings.
3. From the "Press Sleep Button" or "Press and Hold Sleep Button" menu, select Sleep or Hibernate.
Notes:
-
When Press Sleep Button is set to Sleep or Hibernate, press the Sleep button for less than three
seconds to set the printer to Sleep or Hibernate mode.
-
When Press and Hold Sleep Button is set to Sleep or Hibernate, press and hold the Sleep button
for more than three seconds to set the printer to Sleep or Hibernate mode.
4. Click Submit.
Note: If the printer is in Hibernate mode, then the Embedded Web Server is disabled.
Using the printer settings on the computer
Depending on your operating system, access the Sleep Mode menu using the Local Printer Settings
Utility or Printer Settings.
User's Guide
- 104 -
Using Schedule Power
Advertisement
Table of Contents
