Checking For Nozzle Drop-Out - Roland VersaSTUDIO BN-20D Installation Manual

Checking for Nozzle Drop-out

Procedure
1.
Click [Test Print].
A test pattern is printed. Read the on-screen description and check for nozzle drop-out.
• If there is nozzle drop-out, proceed to step 2.
• If there is no nozzle drop-out, click [Close] and proceed to step 4.
2.
Select the [Normal Cleaning], and then click [Go].
Normal cleaning will start.
3.
Click [Test Print] to check for nozzle clogging again in the same manner as step 1.
If the nozzle drop-out is still present, repeat the [Normal Cleaning].
For details on [Medium Cleaning] and [Powerful Cleaning], see the pages related to maintenance
in the "BN-20D User's Manual."
MEMO
Even if nozzle drop-out occurs after cleaning, output quality will not be affected if this drop-out occurs in
about two or three locations.
If you can confirm that the actual printing data can be printed without any problems, you can use the machine
without any further adjustments.
Adjustments before Output
Initial Printer Settings
21