Installation In 3Rd Party Racks - Fujitsu PRIMERGY RX300 S6 Operating Manual

Ê Route the cables as described in the technical manual for the rack in
question with the server pushed in.
4.2.3

Installation in 3rd party racks

I
The support systems from Fujitsu are suitable for use in any 3rd party
racks for standard servers (installation depth 714 - 785 mm) without
restrictions.
Ê Refer to the manual from the rack manufacturer for details of the mechanical
installation and the climatic conditions.
V
CAUTION!
When installing in 3rd party racks, it must be ensured that an air flow
from the front to the back of the rack is guaranteed.
Ê Fit the required original parts (support bracket or cable management
system).
I
Under certain circumstances, you will not be able to use some of the
parts from the rack installation kit supplied - you will need to use
original 3rd party rack parts instead.
RX300 S6
Installing/removing the server in/from the rack
Operating manual 57