Fujitsu PRIMERGY RX300 S6 Operating Manual page 111

Figure 35: Removing the fans (example: fan 1)
Ê Pull the green lever on the fan handle in the direction of the arrow (1) to
release the locking mechanism, and pull out the handle (2).
Ê Pull the fan out of its mounting location by its handle.
Ê Set the fan down on the outside of the server.
V
CAUTION!
Never set a removed/defective fan down inside the server. Risk of
short circuit!
Ê Open the green handl e on the ne w fan, place the f a n in the f a n box and press
the handle together to engage the locking mechanism.
RX300 S6
Operating manual
Hot-plug components
111