Replacing The Air Duct And Closing The Server - Fujitsu PRIMERGY RX300 S6 Operating Manual

Non-hot-plug components
8.2.1.4

Replacing the air duct and closing the server

Ê Insert the air duct in the server.
If an SAS/SATA RAID controller is installed and you disconnected the BBU
cable when you removed the air duct:
Ê Connect the BBU cable that you disconnected previously.
Ê Return the housing cover to its position (see section "Opening/closing the
housing" on page 119).
116 Operating manual
RX 300 S6