Opening/Closing The Housing - Fujitsu PRIMERGY RX300 S6 Operating Manual

8.3

Opening/closing the housing

V
CAUTION!
The safety instructions in chapter
page 31 must be obeyed without fail.
V
CAUTION!
The housing cover must be replaced as soon as possible for purposes of
cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires. The housing cover
must not remain open for longer than 5 minutes.
Figure 41: Opening the housing
Ê Press the two locks in the direction of the arrow (1) and remove the cover (2).
Ê To close it, put the cover on the housing and pull it forwards until the cover
closes and the locking mechanism is engaged.
RX300 S6
1
2
Operating manual
Opening/closing the housing
"Important information" on
1
119