Unpacking the server
4.1
Unpacking the server
V
CAUTION!
Follow the safety instructions in
The server must always be lifted or carried by at least two people.
(For the Japanese market, please refer to " 安全上の注意 ".)
Do not unpack the server until it is at its installation location.
Ê Transport the server to the place where you want to set it up.
Ê Unpack all individual parts.
Keep the original packaging in case you want to transport the server again
(applies only to EMEA market).
Ê Check the delivery for any damage during transport.
Ê Check whether the items delivered match the details on the delivery note.
The product name and serial number of the product can be found on the ID c ard
(see section
"Front of server" on page
Ê Notify your supplier immediately should you discover that the itemsdelivered
do not correspond to the delivery note.
46
"Important information" on page
67).
Operating manual
RX
31.
300 S6