Fujitsu PRIMERGY RX300 S6 Operating Manual page 15

System board
The features of the system board (D2619-N) are described in the technical
manual for the system board in relation to the hardware and in the BIOS setup
manual.
USB Flash Module (UFM) (option)
The system board is equipped with a UFM slot by the manufacturer.
I
The "internal USB stick" and "UFM" slots must not be used in parallel.
Either an internal USB stick or a UFM may be used.
Trusted Platform Module (TPM)
A Trusted Platform Module (TPM) for safer storage of keys can be implemented
as an option. This module enables programs from third party manufacturers to
store key information (e.g. drive encryption using Windows Bitlocker Drive
Encryption).
The TPM is activated via the BIOS system (for more information, refer to the
"D2619-N BIOS Setup Utility for RX300 S6" manual).
V
CAUTION!
– When using the TPM, note the program descriptions provided by the
third party manufacturers.
– You must also create a backup of the TPM content. To do this, follow
the third party manufacturer's instructions. Without this backup, if the
TPM or the system board is faulty you will not be able to access your
data.
– If a failure occurs, please inform your service about the TPM
activation before it takes any action, and be prepared to provide them
with your backup copies of the TPM content.
Slots for expansion cards
The server can be fl e xibly expanded via seven slots (two PCIe Gen2 x8 and fi v e
PCIe Gen2 x4). PCIe Gen2 doubles the bandwidth of currently existing PCIe
busses and allows improved system performance.
One of these slots (slot 1) is occupied with one of tw o possible SAS/SATA RAID
controllers.
RX300 S6
Operating manual
Features
15