Removing Rear Wheel - BMW HP4 Rider's Manual

Removing rear wheel

Place the motorcycle
on an auxiliary stand;
BMW Motorrad recommends
the BMW Motorrad rear-wheel
stand.
Installing rear-wheel stand
( 147).
Slip wooden chocks or similar
under the rear wheel to prevent
it from dropping out after the
quick-release axle has been
removed.
Remove axle nut 1 with
washer.
Slacken locknuts 3 on left and
right.
Slacken adjusting screws 2 on
left and right.
Remove adjusting plate 4 and
push the axle in as far as it will
go.
Remove quick-release axle 5
and remove adjusting plate 6.
Roll the rear wheel as far
forward as possible and
disengage chain 7 from the
sprocket.
Remove the brake and ABS
line from holder 8.
9
143
z