Install screws 2.
Install screw 1.
Hold slipstream deflector 2 in
position, making sure that it is
the correct part for the side of
the motorcycle on which you
are working.
The letter "R" for right or "L"
for left is stamped on the back
of the slipstream deflector.
Install screws 1.
Installing front flashing
turn indicator
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screws 1 and remove
slipstream deflector 2.
Remove screw 1 on the in-
board side of the right side
panel.
Remove screws 2.
Remove screws 3 with the
washers.
6
107
z