General Instructions; Toolkit - BMW HP4 Rider's Manual

General instructions

9
The Maintenance chapter de-
scribes straightforward proced-
126
ures for checking and replacing
certain wear parts.
Special tightening torques are lis-
ted as applicable. The tightening
torques for the threaded fasten-
ers on your vehicle are listed in
the section entitled "Technical
data".
You will find information on more
extensive maintenance and repair
z
work in the Repair Manual on
DVD for your vehicle, which is
available from your authorised
BMW Motorrad dealer.
Some of the work calls for spe-
cial tools and a thorough know-
ledge of the technology involved.
If you are in doubt, consult a
specialist workshop, preferably
your authorised BMW Motorrad
dealer.

Toolkit

1 Spare fuses with puller tool
Miniature fuses, 4 A and
7.5 A
2 Ring spanner
Width across flats 34
Adjust the chain tension
( 138).
3 Socket wrench
Width across flats 17
Adjusting spring preload
for front wheel (
Adjusting spring preload
for rear wheel (
Use plastic tops when
adjusting the front and
rear spring preloads re-
spectively.
Extension for hook
wrench.
4 Torx bit, T25
Removing and installing
body panels.
5 Plastic adapter for socket
wrench
Adjusting spring preload
for front wheel (
6 Plastic adapter for socket
wrench
Adjusting spring preload
for rear wheel (
7 Extension for screwdriver
blade
50).
51).
50).
51).