Helmet Holder - BMW HP4 Rider's Manual

Installing front seat
Engage the front seat in
mount 2, then lower the rear of
the seat to bring the holes into
alignment with screw holes 3.
Take care not to let the screws
scratch the trim panels.
Push the upholstery of the
front seat forward slightly
above the screw holes and
hold it in this position.
Install screws 1.

Helmet holder

Secure the helmet to
motorcycle
Removing rear seat cover
( 52).
Turn the cover upside down.
The helmet catch can
scratch the panelling.
Make sure the lock is out of the
way when you hook the helmet
into position.
Use a plastic-sheathed steel
cable to secure the helmet to

helmet holder 1.

Installing rear seat cover
( 53).
Place the helmet on the front
seat.
with Passenger Bundle
Removing rear seat (
4
55
z
OE
53).