9
Bulbs for the low-beam
headlight
150
H7 / 12 V / 55 W
Bulb for high-beam
headlight
H7 / 12 V / 55 W
Hold the new bulb by the base
only, in order to keep the glass
free of foreign matter.
z
Install bulb 5. Begin by seating
lug 6 and then press the bulb
into the socket.
Engage spring clip 4 in the
catch on left and right.
Connect plug 3.
Install the cover.
Replacing parking-light
bulb, left
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove parking-light cover 1.
Push down retainer 2 (using a
screwdriver if necessary) and
pull socket 3 out of the head-
light housing.