Brake System - BMW HP4 Rider's Manual

Hide thumbs Also See for HP4:
Table of Contents

Advertisement

9
128
Engine oil, specified level
Between MIN and MAX
z
marks
Engine oil, capacity
products recommended by
BMW Motorrad
3.5 l (with filter change)
If the oil level is below the MIN
mark:
Topping up engine oil (
If the oil level is above the MAX
mark:
Have the oil level corrected
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Topping up engine oil
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Wipe the area around the filler
neck clean.
Remove cap 1 from the oil filler
128).
neck.
Damage to the engine
can result if it is operated
without enough oil, but the same
also applies if the oil level is too
high.
Always make sure that the oil
level is correct.
Top up the engine oil to the
specified level.
Checking engine oil level
(
127).
Install cap 1 of the oil filler
neck.

Brake system

Checking function of
brakes
Pull the front brake lever.
The pressure point must be
clearly perceptible.
Press the footbrake lever.
The pressure point must be
clearly perceptible.

Advertisement

Table of Contents
loading

Table of Contents