BMW HP4 Rider's Manual page 106

6
104
Use a small screwdriver to
push retainer 7 to the left and
at the same time push the plug
to the rear and off the anti-
theft alarm bracket.
Remove the anti-theft alarm
z
bracket.
Protect the plug on the motor-
cycle to prevent the ingress of
foreign matter.
Remove screws 8 with wash-
ers and remove the number-
plate carrier. Work the cable
through opening 9.
with Passenger Bundle
Installing rear seat (
Installing number-plate
carrier
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
with Passenger Bundle
Removing rear seat (
Hold the number-plate carrier
in position and work the cable
through opening 9.
Install screws 8 with the wash-
OE
ers.
54).
OE
53).
Close the plug, making sure
that retainer 2 engages, and