BMW HP4 Rider's Manual page 138

with Competition Kit
9
136
Pull clutch lever 2 until resist-
ance is perceptible.
z
In this position, measure clutch
play a between the handlebar
fitting and the clutch lever.
Clutch-lever play
0.5...1.0 mm (at the handle-
bar fitting, with engine cold)
Clutch play is out of tolerance:
Adjust the clutch-lever play
( 136).
OE Adjust the clutch-lever
play
To increase clutch play: turn
screw 1 in the tightening dir-
ection, i.e. into the handlebar
fitting.
To reduce clutch play: turn
screw 1 in the loosening direc-
tion, i.e. out of the handlebar
fitting.
OE
with Competition Kit
To increase clutch play: turn
screw 2 in the tightening dir-
ection, i.e. into the handlebar
fitting.
To reduce clutch play: turn
screw 2 in the loosening direc-
tion, i.e. out of the handlebar
fitting.
Checking clutch-lever play
( 135).
Repeat the steps in this pro-
cedure until clutch play is set
correctly.