Turn Indicators - BMW HP4 Rider's Manual

Low-beam headlight
4
The low-beam headlight switches
on automatically when you start
38
the engine.
High-beam headlight and
headlight flasher
Start the engine.
z
Push button 1 forward to
switch on the high-beam
headlight.
Pull button 1 back to operate
the headlight flasher.
Parking lights
Switch off the ignition.
Immediately after switching off
the ignition, push button 1 to
the left and hold it in this po-
sition until the parking lights
come on.
Switch the ignition on and off
again to switch off the parking
lights.

Turn indicators

Operating the turn
indicators
Switch on the ignition.
The turn indicators are can-
celled automatically after
you have ridden for approximately
10 seconds and covered a dis-
tance of about 300 m.
Push button 1 to the left to
switch on the left turn indicat-
ors.
Push button 1 to the right to
switch on the right turn indicat-
ors.