Powerware BPIV Installation & Operation Manual page 25

3.
Set each pallet on a firm, level surface, allowing a minimum clearance of
3m (10 ft) on each side for removing the cabinets from the pallets.
4.
Remove the protective covering from the cabinets.
5.
Remove the packing material, and discard or recycle in a responsible manner.
6.
After removing the protective covering, inspect the contents for any evidence
of physical damage, and compare each item with the Bill of Lading. If damage
has occurred or shortages are evident, contact the Powerware, Inc. Customer
Service Department immediately to determine the extent of the damage and its
impact upon further installation.
NOTE: While waiting for installation, protect the unpacked UPS cabinets from
moisture, dust, and other harmful contaminants. Failure to store and
protect the UPS properly may void the warranty.
Powerware BPIV (10 kVA- -30 kVA) Installation and Operation
164201406 Rev. C 013004
1--5