10.3
Connecting Battery Cables
WARNING
•
NEVER allow any of your tools and/or battery cable(s) to contact BOTH battery terminal(s)/
post(s) at the same time. An electrical short may occur and serious personal injury or damage
may occur.
•
The use of rubber gloves and chemical goggles is recommended when working with batteries.
CAUTION
•
When connecting the battery cables to the battery(ies), the battery cable(s) MUST be con-
nected to the battery terminal(s)/post(s) depending on battery type. ALWAYS check the
battery top for POSITIVE (+) and NEGATIVE (-) marking symbols before connecting the
battery cables.
1. Connect battery cable(s) to battery(ies) terminal(s)/post(s) as follows.
•
Negative (-) BLACK battery cable to NEGATIVE (-) battery terminal/post.
•
Positive (+) RED battery cable to POSITIVE (+) battery terminal/post.
3. Secure the battery cable(s)/ring terminal(s) to the battery terminal(s)/post(s), BLACK to NEGA-
TIVE (-) and RED to POSITIVE (+), with the provided M6 hex screw, hex locknut and washer.
Securely tighten.
4. Verify all battery cable(s)/ring terminal(s) are correctly installed and securely tightened.
5. Slide terminal cap(s) onto battery clamps / terminals.
57