Placing A Call On Hold; Retrieving A Call On Hold - Nortel IP Phone 2007 User Manual

Standard
78

Placing a call on hold

Use the Hold feature when you are talking on one line and another call arrives on
a second line. Retain the original call by placing it on hold, and then answer the
second call.

Retrieving a call on hold

NN42020-104 MCS 5100 Release 4.0
Note: You cannot place an emergency services call on hold.
Press the Hold key. The LCD indicator flashes beside
the line on hold.
If Automatic Hold is enabled, the active call is
automatically placed on hold when you answer the
second call.
Tap the flashing line (DN) soft key.
Standard 01.04 March 2007