Do Not Disturb - Nortel IP Phone 2007 User Manual

Standard
110
Enabling call forwarding
Forwrd
Disabling call forwarding
Ok

Do Not Disturb

Use the Do Not Disturb option to reject all incoming calls so that you can work
without interruption.
NN42020-104 MCS 5100 Release 4.0
1. Use the dialpad to enter the address.
2. Tap one of the following soft keys:
or
Forwrd
or
Note: You cannot enable the Do Not Disturb feature during an
emergency services call.
Standard 01.04
• Forwrd (to enable call forwarding)
• Cancel (to return to the Srvcs menu)
If you choose the Forwrd soft key, the system
attempts to contact the address you entered. If
the system accepts the address you entered, a
message appears stating
Automatic Call Forwarding (All Calls) is
now enabled.
The following prompt appears:
Disable Automatic Call Forwarding
Perform one of the following:
• Tap the Ok soft key.
The following message appears:
Automatic Call Forwarding (All Calls) is
now disabled
• Tap the Cancel soft key to return to the Srvcs
menu.
March 2007