Nortel IP Phone 2007 User Manual page 134

Standard
134
2 Follow the prompts to configure all necessary parameters as described in
Table 7 "Configuration parameters" on page
After you press the Ok soft key on the last configuration parameter, you see a
message "Locating Server".
Table 7 Configuration parameters
Parameter
SET IP
NETMSK
DEF GW
S1 IP
S1 PORT
S1 ACTION
S1 RETRY Count
S2 IP
S2 Port
S2 ACTION
S2 RETRY COUNT
VLAN (0=No, 1=Yes)
NN42020-104 MCS 5100 Release 4.0
Value
<valid IP address>
<valid subnet mask>
<valid Default Gateway>
<valid Server IP address>
5000
1
1
<valid Server IP address>
5000
1
1
0
Standard 01.04
134.
Definition
IP address of your
IP Phone 2007 provided by
your system administrator
Subnet Mask provided by
your system administrator
Default gateway IP network
address provided by your
system administrator
Primary server (IP Client
Manager or Multimedia PC
Client) IP address
Primary server port
Primary action code (enter 1
for UNIStim)
Primary retry count
Secondary server (IP Client
Manager or Multimedia PC
Client) IP address
Note: If you do not know the
secondary IP address, use
the primary IP address for
the secondary address.
Secondary server port
Note: If you do not know the
secondary port, use the
primary port.
Secondary action code
(enter 1 for UNIStim)
Secondary retry count
QoS 802.1a VLAN Tag
Service
March 2007