Nortel IP Phone 2007 User Manual page 87

Standard
Viewing active conferees
Disconnecting a conferee
1. While you are on a conference call, tap the
Conferee Selectable Display soft key to turn on
the LCD indicator. Each tap changes the screen to
show a different active conferee.
Note: This action has no effect on the display of
other telephones involved in the conference.
2. Press the Goodbye key.
If configured, the Conference Count Display
returns an updated total count of conferees. The
LCD indicator turns off.
1. While you are on a conference call, tap the
Conferee Selectable Display soft key until the
conferee you want to disconnect appears on the
screen.
2. Tap the DN soft key on which the conference call is
established.
3. For a single conferee, press the Goodbye key. If
configured, the Conference Count Display returns
an updated total count of conferees. The LCD
indicator turns off.
Note: For multiple conferees, repeat steps 1 and 2
until all conferees are disconnected. Then press the
Goodbye key.
IP Phone 2007 User Guide
87