Sending Data To A Pc On The Network (Scan To Smb); Scan To Smb; Smb Transmission To Windows File Sharing (Mac Os X)/Samba (Linux/Unix) - Oce cm3521 User Manual

Scanning documents
2.5

Sending data to a PC on the network (Scan to SMB)

Scan to SMB

The Scan to SMB operation can be used to directly send the scanned data
to a specific computer on the network.
To use the Scan to File (SMB) function, specify the Windows shared file set-
ting on the computer that is to receive the data in advance.
Reminder
To send to a Windows shared folder, enter the host name and folder
name using capital letters when registering the destination.
Note
For the SMB transmission procedure, refer to "Sending the scanned data
to a computer on the network (SMB)" on page 1-5.
SMB transmission to Windows File Sharing (Mac OS X)/Samba (Linux/
Unix)
When performing SMB transmission to Mac OS X, Linux, or Unix, the condi-
tions described below must be meet for the network settings and user name.
Change the settings according to the transmission environment.
Settings on this machine
- From [Administrator Setting] – [Network Setting] – [SMB Setting], specify
"v1" for the NTLM setting.
Settings on the server
- For the user name and shared folder names, enter 12 characters or less.
- When looking up a destination, the shared folder names are shown in al-
phanumeric characters only. Sub-folder names can be shown in charac-
ters other than alphanumeric characters.
- To lookup a destination, enter the user ID and password first.
Note
Samba is a program that provides services for SMB clients using Unix or
Linux. In Mac OS X, Samba is called "Windows File Sharing".
cm3521
2
2-31