Section 10: Appliance Set-Up; Log Set Placement - Heatilator PT60 Owner's Manual

10
Appliance Set-Up
A. Optional Log Set Placement Instructions
2 PIECE LOG SET INSTALLATION
1. Place the left log as shown. There are 2 indentations in
the bottom of the log to fi t over the screw heads in the
fi rebox. Figures 47.1 and 47.2.
2. Place the right log in front of the 2 screw heads in the
fi rebox. Figures 47.3 and 47.4.
CAUTION! Logs are FRAGILE. Use extreme care when
handling or cleaning logs.
Log fits over screws
Figure 47.1
Log has indentations on the
bottom to fit over the screw heads.
Figure 47.2
April 29, 2011
Left Log
Figure 47.3
Figure 47.4
NOTICE:
Due to the abrasive nature of a pellet appliance fi re, the logs
are not covered under warranty.
Any placement variation other than shown here can cause
excessive heat and shall void the appliance warranty.
7051-507
POINTE Pellet Fireplace
Right Log
Log rests in front of screws
Page 47