Licence plate light (Combi)
ä
First read and observe the introductory information and safety warn-
ings
on page 210.
›
Insert a flat screwdriver into the opening in the area of the arrow
carefully press towards the centre of the lamp, by doing so the lamp jumps out
slightly.
›
Remove the lamp.
›
Remove the faulty bulb from the holder and insert a new one.
›
Replace the glass cover and push in until the stop. Make sure that you install
the glass cover in the correct position.
Fig. 193
Boot lid: Licence plate light
» Fig. 193
and
Ð
215
Fuses and light bulbs