Tail Lamp Assembly - Skoda Superb Owner's Manual

Tail lamp assembly

Fig. 189 Outer part of the tail light/Removing the internal part of the tail
light
Fig. 190 Outer part of the tail light: Bulbs/Inner part of the tail light: Bulbs
ä
First read and observe the introductory information and safety warn-
ings on page 210.
Overview of the location of the bulbs
- Turn signal lights
1
- Parking lights/Brake light
2
- parking lights
3
- Reversing light
4
- Rear fog light
5
» Fig. 190.
Removing and installing the outer part of the tail light
›
Open the boot lid.
›
Remove the plug » Fig. 189 -  and unscrew the tail light with a torx
wrench » page 196, Vehicle tool kit.
›
Carefully remove the light. Do not pull the grommet with the cables out of the
bodywork.
›
To re-install the tail light, first of all guide it with the support
wards the front onto a bolt on the bodywork.
›
Carefully press the tail light onto the bodywork.
›
Screw the tail light into place and push in the plugs
Changing bulbs in the outer part of the tail light
›
To replace the bulb, turn the bulb holder anti-clockwise up to the stop and re-
move it from the housing.
›
Replace the bulb, insert the holder with the bulb into the housing and turn in a
clockwise direction to the the stop.
Removing and installing the inner part of the tail light
›
Open the boot lid.
›
Remove the tail light cover on the inner side of the boot lid
›
Press the lug » Fig. 189 -  and remove the lamp holder from the tail light
housing.
›
To re-install, insert the lamp holder into the tail light housing.
›
Press the lug until it clicks into place.
›
Insert the tail light cover on the inner side of the boot lid.
Changing bulbs in the inner part of the tail light
›
Remove the faulty bulb » Fig. 190
4
›
Turn the bulb 5 in an anti-clockwise direction up to the stop and remove. In-
sert a new bulb into the holder and turn in a clockwise direction to the the
stop.
°» Fig. 190
A
» Fig. 189 - .
» Fig. 189 - .
from the holder and insert a new bulb.
Fuses and light bulbs
to-
Ð
213