Skoda Superb Owner's Manual page 70

Memory function of the power seat
ä
First read and observe the introductory information and safety warn-
ings on page 66.
The memory function for the driver's seat provides the option to store the individ-
ual positions of the driver's seat and the external mirrors. Each of the three mem-
ory buttons » Fig. 55 can be assigned a set position.
B
Storing seat and exterior mirror settings for driving forward
›
Switch on the ignition.
›
Adjust the seat to the desired position.
›
Adjust both of the exterior mirrors
›
Press the button » Fig. 55.
A
SET
›
Within 10 seconds after pressing the
button .
B
An acknowledgment sound confirms the storage in the seat memory.
Storing exterior mirror setting for reversing
›
Switch on the ignition.
›
Press the required memory button
›
Move the rotary knob for the exterior mirror control into position 
›
Engage reverse gear.
›
Adjust the right exterior mirror to the desired position
›
Take the vehicle out of gear.
The adjusted position of the exterior mirror is stored in the seat memory.
Retrieving the saved setting
The retrieval is possible when turned the ignition is switched on and the vehicle
speed is less than 5 km/h or when the ignition key is inserted in the ignition lock.
›
Briefly press the desired memory button
68
Using the system
Fig. 55
Memory buttons and SET button
» page 64.
button, press the desired memory
SET
» Fig. 55.
B
» page
» page 64.
» Fig. 55.
B
Stopping the ongoing adjustment
›
Press any button on the driver's seat.
›
The movement can be stopped by pressing the button
key and opening the driver's door.
Note
Each time new seat and exterior mirror settings for forward travel are saved, the
individual setting for the right exterior mirror for reverse travel must also be
saved again.
Memory function of the remote control key
ä
First read and observe the introductory information and safety warn-
ings on page 66.
The automatic storage function of the driver's seat and exterior mirrors position
when locking the vehicle can be turned on in the memory of the remote control
key. When unlocking the vehicle with the same key, the driver's seat and the ex-
terior mirrors assume the positions stored in the memory of this key.
Activating the function
›
Unlock the vehicle with the remote control key.
›
Press and hold any memory button
assumed the position stored under this button, at the same time press the but-
ton on the remote control key within 10 seconds.

The successful activation of the function is confirmed by an audible signal.
Deactivating the function
›
Unlock the vehicle with the remote control key.
›
Press and hold the
SET
the button on the remote control key within 10 seconds.

64.
The successful deactivation of the function is confirmed by an audible signal.
Stopping the ongoing adjustment
›
Press any button on the driver's seat.
›
The movement can be stopped by pressing the button
key and opening the driver's door.
on the remote control

» Fig. 55 on page 68. After the seat has
B
button » Fig. 55 on page 68. At the same time, press
A
on the remote control

Ð
Ð