Fixing floor covering of the boot
Fig. 66 Boot: fixing the floor covering/fixing the Combi floor covering
ä
First read and observe the introductory information and safety warn-
ings
on page 72.
There is a loop or hook (Combi) located on the floor covering of the boot. If you
need to access the spare wheel, for example, the raised floor cover can be attach-
ed to a hook on the boot cover
» Fig. 66
bi)
» Fig. 66
- .
Luggage net
ä
First read and observe the introductory information and safety warn-
ings
on page 72.
The luggage net is designed for the transportation of lighter objects.
- or to the frame of the boot lid (Com-
Fig. 67
Boot: Luggage net
WARNING
Only store soft objects in the luggage net (up to a total weight of 1.5 kg).
Heavy objects are not secured sufficiently - risk of injury!
CAUTION
No objects with sharp edges should be stored in the luggage net, as they can
damage the luggage net.
Boot cover
Ð
ä
First read and observe the introductory information and safety warn-
ings
on page 72.
The boot cover can be removed if you wish to transport bulky goods.
›
Unhook the support straps
›
Place the cover in the horizontal position.
›
Pull the cover out of the holders
›
To reinstall, first of all push the boot cover into the holders
the support straps
on the boot lid.
1
The removed boot cover can be stowed behind the seat backrest.
WARNING
No objects should be placed on the boot cover, the vehicle occupants could be
endangered if there is sudden braking or the vehicle collides with something.
Fig. 68
Removing the boot cover
» Fig.
68.
1
horizontally towards the rear.
2
and then hook
2
Seats and Stowage
Ð
£
75