Multifunction Display (Onboard Computer) - Skoda Superb Owner's Manual

Display in rear centre console
ä
First read and observe the introductory information and safety warn-
ings on page 8.
The time and the outside temperature is displayed on the display in the rear cen-
tre console when the ignition is switched on
The values are taken over by the instrument cluster.

Multifunction display (onboard computer)

ä
Introduction
This chapter contains information on the following subjects:
Memory
Operation
Multifunction display details
Warning against excessive speeds
The multifunction display can only be operated when the ignition is switched on.
After the ignition is switched on, the function displayed is the one which you last
selected before switching off the ignition.
The multifunction display appears in the display
formation display » page 15.
On vehicles with an information display, there is an option to fade out some of
the information.
12
Using the system
Fig. 4
Centre console at rear: Display
» Fig. 4.
» Fig. 5 on page 12 or in the in-
WARNING
Concentrate fully at all times on your driving! As the driver you are fully re-
■
sponsible for the operation of your vehicle.
Do not only rely upon the information given on the outside temperature dis-
■
play that there is no ice on the road. Even at temperatures around +4 °C, black
ice may still be on the road surface – warning, drive with care!
CAUTION
Pull out the ignition key if coming in contact with the display (e.g. when cleaning)
to prevent any possible damage.
Note
In certain national versions the displays appear in the Imperial system of meas-
■
ures.
If the display of the second speed is activated in mph, the current speed is not
■
indicated in km/h on the display.
Ð
Memory
12
13
13
15
ä
First read and observe the introductory information and safety warn-
ings on page 12.
The multifunction display is equipped with two automatic memories. The selected
memory is shown in the Display
The data of the single-trip memory (memory 1) is shown if a 1 appears in the dis-
play. A 2 shown in the display means that data relates to the total distance mem-
ory (memory 2).
Fig. 5
Multifunction display
» Fig. 5.
Ð
£