Enabling Epson Universal Print Driver (PCL) or PostScript
Printing
Before enabling Epson Universal Print Driver (PCL) or PostScript printing on your product, make sure
you have installed the software as described on the Start Here sheet.
To download the Epson Universal Print Driver or PostScript drivers, go to epson.com/support/wfr5190.
Selecting PDL (Page Description Language) Settings
Selecting Printer Language and Interface Settings
Printing a PS3 (PostScript) Status Sheet
Selecting PDL (Page Description Language) Settings
You can select settings for Epson Universal Print Driver (PCL) and PostScript printing using the control
panel on the product.
Note: These settings can be locked by an administrator. If you cannot access these settings, contact
your administrator for assistance.
1. Press the up or down arrow buttons, select Menu, and press the OK button.
You see a screen like this:
2. Select System Administration and press the OK button. Enter the administrator password, if
necessary.
3. Select Universal Print Settings and press the OK button.
4. Select PDL Print Configuration and press the OK button.
42