Epson EPL-N2700 Service Manual page 40

EPSON EPL-N2700 / N2750
24: Indicated when maintenance menu becomes valid by the cache operation at
powering on.
25: Indicated and selected only when optional 5 bin or 10 bin mail bin unit is installed
and the mode is set to the Sorter mode or MultiSort mode.
26: Not indicated on the panel. Selected by EJL or PJL. Not printed on the status sheet
either.
27: Indicated and selected only when optional 5 bin or 10 bin mail bin unit is installed.
When you change the settings and close the panel setting mode, the printer warm-
boots. Also, when you changed the settings, Test Menu will not be indicated until
you close the panel setting mode.
NOTE: Mode settings on the paper eject mechanism and interface
settings do not become valid until warm-boot or turning on
the printer again. Also, when you changed the mode on the
paper eject mechanism, the setting of paper eject selection
item indicated / not indicated will not become valid until
warm-boot or turning on the printer again.
When you removed the options, if the stored panel settings
and the real situation does not correspond, the stored
settings will be reset to the default settings.
Product Description
EPL-2750
o
Table 1-24. EPL-2750 SelecType Option
MENU Button
ITEM Button
Test Menu
Status Sheet
Network Status Sheet
*2
AUX Status Sheet
*3
PS3 Status sheet
*3
PS3 Font Sample
ESC/Page Font Sample
LJ4 Font Sample
ESCP2 Font Sample
FX Font Sample
1239X Font Sample
Emulation Menu
Parallel / Serial / Network / AUX
Printing Menu
Paper Source
Page Size
Wide A4
Orientation
Out Bin
Copies
*12
Quantity
Manual Feed
Resolution
*13
Skip Blank Page
*14
Duplex
*14
Binding
*14
Start Page
Panel Operation
VALUE Button
*1
*4
*6
Auto / LJ4 / ESCP2 / FX / I239X / PS3
Auto / MP / LC1 / LC2
*8
A4 / A3 / A5 / B4 / B5 / LT
GLT / GLG / EXE / F4 / MON / C10 / DL / C5 /
C6 / IB5 / CTM
OFF / ON
Port / Land
Face-Down / Stacker
*11
Sorter
−
1 999
−
1 999
OFF / ON
600 / 300
OFF / ON
OFF / ON
Long Edge / Short Edge
Front / Back
Revision B
*5
/ GL2
*7 *7
/ LC3
*8
/ B / HLT / LGL /
−
*9 *10
/ Mailbox 1 10 /
40