Heater Lamp Replacement - Epson EPL-N2700 Service Manual

EPSON EPL-N2700 / N2750

4.2.21.2 Heater Lamp Replacement

1. Remove the Fuser Unit. (See Section 4.2.21.1.)
2. Release the joint for the Fuser Unit Cover and the Fusing Roller
Heater Lamp Front Cover.
3. Remove one screw (3501) securing the Fusing Roller Heater Lamp
Front Cover to the Fuser Unit Frame Assembly, and remove the
Fusing Roller Heater Lamp Front Cover.
Figure 4-38. Fuser Heater Lamp Front Cover Removal
Disassembly/Assembly
4. Remove one screw (1305) securing the Heater Lamp Holder (front)
to the Fuser Unit Frame Assembly, and remove the Heater Lamp
Holder and the Heater Lamp.
Do not touch the glass tube in the Fusing Roller Heat
n
C A U T I O N
Lamp.
When installing the Fusing Roller Heater Lamp, set it
n
with the voltage marking facing to the gear side (the
other side of the Heater Lamp Front Cover).
Disassembly Procedure
Figure 4-39. Heater Lamp Removal
Revision B
124